The 150B/H Blowing Machine Kit is suitable for producing 5 gallon, 3 gallon bottles and is generally used to produce any format of PET/PC and PE preform plastic with neck diameter between 15mm – 200mm. It is capable of blowing 140-150 18.9 l. bottles per hour with handle and 170-180 10 l. bottles per hour without handle.
It contains a rotating infrared preheater to heat the PET preforms. This method has simplified the control of the preheated tube and ensures proper preheating.
The 150B/H Blowing Machine Kit uses the mechanical clamping of the double-arm mould, which guarantees a tight seal even under high pressure.
The air system has been separated into two parts: pneumatic action and bottle blowing. The two large volume air reservoirs provide sufficient and constant high pressure to blow large and/or irregular shaped bottles.
This machine is equipped with a silencer and an oil pump to reduce noise and friction.
The machine operates in manual and semi-automatic mode.
It is small, easy and safe to operate.
The machine consists of two parts: the blowing part and the preheater. First, the preheater heats the PET preform until it is soft and elastic. It is then fed into the moulds of the blow moulding machines and blown into the designed shape.
Este kit incluye:
- Blowing machine nº1.
- Blowing machine nº2.
- Water chiller nº1.
- Water chiller nº2.
- Double Oven.
- High pressure compressor.
- Low pressure compressor nº1.
- Low pressure compressor nº2.
- Air dryer low pressure nº1.
- Air dryer high pressure nº2.
- Air tank low pressure nº1.
- Air tank high pressure nº2.
- Laser marker.
- Bottle cooler.
- 2 moulds.
|Dimensions and weight||Characteristics|
|Total weight: 2 t||Power consumption: 15 kW / 380 v (excluding air compressor)|
|Blowing machine 1: 220 cm x 78 cm x 200cm||Closing pressure: 600 kN|
|Blowing machine 2: 220 cm x 78 cm x 200 cm||Tension rod travel: 550 mm|
|Preheater: 270 cm x 70 cm x 170cm||Moving mould plate travel: 350 mm|
|Maximum mould thickness: 330 mm|
|Maximum mould width: 380 mm|
|Tension rod diameter: 22 mm|
|Maximum diameter of the bottle: 280 mm|
|Maximum height of the bottle well: 550 mm|
|Maximum volume of the bottle: 25 l|
|Working pressure (air): 0,8 MPa|
|Blowing pressure (air): 0,8-0,35 MPa|